Installation - attika Q-TEE I Bedienungsanleitung

English

Installation

The stove is a free standing stove and is placed on fireproof material or on a socket.
When installing the wood burning stove, there are some rules which muST be followed:
When installing the appliance, all local rules and regulations, including those referring to
national and european standards need to be complied with.
local authorities and a chimney specialist should be contacted prior to set up.
This appliance may only be installed by a qualified Rais dealer/installer, otherwise the war-
ranty is voided.
It is prohibited to carry out unauthorised alterations to the stove.
There must be plenty of fresh air in the room where the stove is being installed, in order
to ensure proper combustion - possibly through an airbox connection. note that any
mechanical exhaust ventilation - e.g. an extraction hood - may reduce the air supply.
any air grates must be placed in such a manner, that the air supply is not blocked.
The floor structure must be able to carry the weight of the wood burning stove, as well as
the weight of a chimney, if necessary. If the existing floor construction doesn't meet this
requirement, suitable measures (e.g. load distributing plate) shall be taken to achieve it.
RaIS recommends to consult a building expert.
When you choose where to set up your RaIS wood burning stove, you should consider
the heat distribution to the other rooms. This will enable you to get the best use out of
your stove.
The stove should be set up at a safe distance from inflammable materials.
See the manufacturer's plate on the wood burning stove.
upon receiving the stove must be inspected for defects.
noTe!
This appliance may only be installed by a qualified RaIS dealer/installer.
See www.rais.com for dealer list.
attika
RAIS/ - User manual for RAIS Q-Tee II
63