Sony VGP-MR100 Kurzanleitung Seite 16

3 Connect the Network Media Receiver to
computer via a network cable
This step is not required when using a wireless connection between the Network Media Receiver
and the computer. Proceed to "4 Connect power" (page 24).
Note
Make sure that the power cord is not plugged into an AC outlet when you connect the Network Media
Receiver to the computer, or the Network Media Receiver may not operate properly.
Network cable connection
To connect the Network Media Receiver to the computer, the network port of the computer must be
free, or a hub with at least one free port must be available.
Depending on your system environment, the connection will differ.
Also refer to the separate Quick Connection Guide.
16
VGP-MR100QSG(GB)_2-580-488-11(1)