Timex INTELLIGENT QUARTZ-Serie Bedienungsanleitung Seite 122

2. To stop, press Button A (Start/Stop) again. All hands
stop moving.
3. To resume, press Button A (Start/Stop) again.
4. To reset the fly-back chronograph to zero position,
press Button B (Fly-back/Reset).
When the chronograph is reset, all hands move to
zero position. After another eight seconds, the watch
resumes normal display of the second time zone.
5. To reset and/or restart the fly-back chronograph while
it is running, press and hold Button B (Fly-back/Reset).
Release it when you wish to restart.
Hands do not need to reach zero positions before
Button B is released. If Button B is released before
hands have returned to zero positions, timing will
reset immediately, and hands will move to correct
22
timing from time of button release. This "fly-back"
feature allows for the measurement of lap time.
CARE AND MAINTENANCE
To maintain water-resistance, do not press or pull any
button or crown under water.
• The watch is water-resistant only as long as the crystal,
push button, crown and case remain intact
• The watch is not a diver watch and should not be used
for diving
• Rinse the watch with fresh water after exposure to salt
water
• The watch may be cleaned with a cloth and mild soap
in warm water
23