Automatic Programmes - Silvercrest SIKP 2000 E3 Bedienungsanleitung

Automatic programmes

Boost
Use the "Boost" programme to accelerate the cooking process.
Press the "Boost"
switch to the highest output level for around 30 seconds. The display
read "
programme, press the "Boost" button
If you do not interrupt the programme, the appliance will automatically revert to
the previous power level or temperature after 30 seconds. The "Boost" indicator
lamp
Milk
Use the "Milk" programme to heat milk without it boiling over. The milk is heated
to around 60°C at a low power level and kept at that temperature for around
20 minutes.
Press the "Milk" button
lights up. The display
until the end of the programme, starting at "20".
NOTE
► You can activate the "Boost" programme at the same time. The "Milk"
programme will be interrupted and restarted after the boost period.
► If you activate the "Keep warm" programme at the same time, the "Milk"
programme will be cancelled.
► Press the "Mode" button
return to normal operation.
SIKP 2000 E3
button while the cooker is in operation. The appliance will
" and the "Boost" indicator lamp
will go out.
during operation. The "Milk" indicator lamp
now alternately shows "60" and the time remaining
will light up. To interrupt the
again.
to cancel the "Milk" programme and
will
GB │ MT │
73 ■