Distributed Cc-1 Zone Controller Connection To The Amplifier - Bose PowerShare PS602 Installations- Und Bedienungsanleitung

Remote Volume Control

Distributed CC-1 Zone Controller Connection to the Amplifier

For installations using multiple CC-1 zone controllers, you can also connect the zone controllers to the CV41 4-to-1
Converter, then create a single home run from the CV41 back to the amplifier. Create these connections using CAT 5 cables
and RJ-45 connectors.
The CV41 connects two CC-1 zone controllers to a PS602. Each zone controller can be independently configured to control
any output, or combination of outputs.
If only one CC-1 is used to control all outputs, then the CV41 is not required, as the PS602 can accept one RJ-45
connection.
Figure 9. Distributed CC-1 ControlCenter zone controller connection to amplifier
POWER
PowerShare
Adaptable Power Ampli er
24 English
CAT 5 cable
7.6 m (25 ft) max
SIGNAL
1 2
LIMIT
CAT 5 cable
609 m (2000 ft) max
pro.Bose.com
PS602
Installation Guide