Technical Information
2-Channel Configuration (PS602 and PS602P)
Figure 10. PowerShare Editor software 2-channel configuration for PS602 and PS602P amplifiers
LED Fault Indications
Figure 11. PS602 and PS602P
PowerShare
Adaptable Power Ampli er
POWER LED (both amplifiers)
Solid amber LED indicates an over-temperature fault
Solid red LED indicates a power supply fault
SIGNAL LED (both amplifiers)
Both LEDs will display solid red if a power supply fault is detected
LIMIT LED (both amplifiers)
Each LIMIT LED will individually display solid red if there is an EHF fault on that channel
Both LEDs will display solid red when the outputs are muted due to an amplifier fault, or if there is a power supply fault
26 English
SIGNAL
1
POWER
LIMIT
2
pro.Bose.com
Installation Guide