Installing The Feet On The Amplifier; Stacking Units - Bose FreeSpace IZA 2120-LZ Installations- Und Bedienungsanleitung

Installation and Placement
pro.Bose.com

Installing the feet on the amplifier

The included feet are comprised of two parts: a foot and a pin.
1. Place the amplifier upside-down on a flat, level surface on a protective covering to avoid scratching the top of the
chassis.
2. Insert the four feet into the four holes on the bottom of the chassis.
3. Insert a pin into the hole on the foot.
4. Press down on the pin until the foot locks into place. Repeat for all four feet.

Stacking units

One amplifier can be stacked on top of another when there is limited space available on a table, counter, or shelf.
English - 27