Aux Function - Clarion DXZ788RUSB Bedienungsanleitung

01_DXZ788RUSB_EN.book 37 ページ ２００７年１１月２７日 火曜日 午後６時３４分
Operations Common to Each Mode
Performing a system check
2-1. Select "SYSTEM CHECK".
3-1. Press and hold the [
second or longer.
"SYSTEM CHECK" appears in the display,
then the unit returns to the speaker system
selecting mode.

AUX function

This system has an external input cable so you
can listen to sounds and music from external
devices connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is "MID".
1. Press the [OPTION] button, "AUX SENSE
MID" appears in the display.
2. Push the [P.CH] button upward or downward
to select "LOW", "MID" or "HIGH".
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD and CD changer.
The number of titles that can be entered for
each mode are as follows.
Mode
CD mode
CD changer mode
DCZ628 connected
1. Press the [SRC] button to select the mode
you want to enter a title (CD or CD changer).
2. Select and play a CD in the CD changer for
which you want to enter the title.
3. Press the [OPTION] button.
4. Push the [SEEK PANEL] leftward or
rightward to select "TITLE INPUT".
5. Press the [ ] button.
The display switches to the title input display.
6. Push the [SEEK PANEL] leftward or
rightward to move the cursor.
7. Press the [MENU] button to select a
] button for 1
8. Push the [P.CH] button upward or downward
9. Repeat steps 6 to 8 to enter up to 10
10.Press and hold the [
Clearing titles
1. Select and play a CD in the CD changer for
2. Press the [OPTION] button.
3. Push the [SEEK PANEL] leftward or
4. Press the [
5. Press and hold the [MENU] button for 1
6. Press and hold the [
Number of titles
50 titles
Number of titles
100 titles
character type. Each time you press the
[MENU] button, the character type changes
in the following order:
Capital letters Small letters
Symbols Umlaut Capital letters...
to select the desired character.
characters for the title.
seconds or longer to store the title into
memory.
which you want to clear the title.
rightward to select "TITLE INPUT".
] button.
The display switches to the title input display.
second or longer.
All characters in the title disappear.
seconds or longer to store the setting.
DXZ788RUSB
Numbers/
] button for 2
] button for 2
37