Clarion DXZ788RUSB Bedienungsanleitung Seite 22

01_DXZ788RUSB_EN.book 22 ページ ２００７年１１月２７日 火曜日 午後６時３４分
Basic Operations
Setting the P.EQ ON/OFF
∗ The factory default setting is "OFF".
2-1. Select "P.EQ ON/OFF".
3-1. Push the [P.CH] button upward or
downward to select "ON" or "OFF".
Setting the EQ SELECT
∗ The factory default setting is "P.EQ".
2-1. Select "EQ SELECT".
3-1. Push the [P.CH] button upward or
downward to select "P.EQ" or "B/T" (Bass/
Treble).
Setting the Subwoofer
∗ The factory default setting is "ST".
2-1. Select "SUB WOOFER".
3-1. Push the [P.CH] button upward or
downward to select "ST", "MONO" or
"OFF".
CT (Clock Time) function
The CT function receives CT data sent from an
"Radio Data System" station and displays the
time.
∗ If a CT data is not being received, "– –:– –CT"
appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
22
DXZ788RUSB