Herunterladen Inhalt Inhalt Diese Seite drucken

Clarion DXZ788RUSB Bedienungsanleitung Seite 30

Cd/usb/mp3/wma/aac-receiver mit cenet-steuerung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 99
01_DXZ788RUSB_EN.book 30 ページ 2007年11月27日 火曜日 午後6時34分
CD/MP3/WMA/AAC Operations
Logical format (File system)
1. When writing MP3/WMA/AAC file on a CD-R
disc or CD-RW disc, please select "ISO9660
level 1, 2 or JOLIET or Romeo or APPLE
ISO" as the writing software format. Normal
play may not be possible if the disc is
recorded on another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA/AAC
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
Folder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 510 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
3. Some noise may occur depending on the
type of encoder software used while
recording.
Set the type of file to be played
(multi-session function)
When a single disc holds both normal CD type
tracks and MP3/WMA/AAC type tracks, use this
command to select which type of track to play.
∗ Default setting is "CD".
• When only one type of track (either music CD
or MP3/WMA/AAC) is recorded on a disc,
selecting either type will allow playback of the
disc.
• When playing CCCD (copy-control CDs), set
to CD type.
30
DXZ788RUSB
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select "MULTI SESS".
3. Push the [P.CH] button upward or downward
to select "CD" or "MP3". The mixed mode is
switched between CD type or MP3/WMA/
AAC type.
• CD
When playing music CD only.
• MP3
When playing music MP3/WMA/AAC only.
4. When setting is completed, remove the disc
and reinsert it.
Backup Eject function
You can eject a disc by pressing the [Q] button
even if the engine key or ACC is at the OFF
position.
CAUTION
When the disc is ejected, press the [Q]
button to close the control panel. If the
control panel is left open, you will hear a
double beep, and the control panel
automatically closes.
1. Press the [Q] button.
The control panel opens.
2. Press the [Q] button.
The disc is ejected.
Note:
• Always close the SLOPING CONSOLE after
opening it or ejecting the CD.
CAUTION
• Be careful not to catch your hand or
fingers while closing the SLOPING
CONSOLE.
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis