Turning Radio Cellular On Or Off; Bluetooth - Motorola WAVE TLK 100i Bedienungsanleitung

English
• Voice Announcement sounds Wi-Fi On.
• The display shows a check mark beside the Wi-Fi icon.
If Wi-Fi is off, the following occurs:
• Voice Announcement sounds Wi-Fi Off.
• The display shows an "X" mark beside the Wi-Fi icon.

Turning Radio Cellular On or Off

1 To scroll through a list of menu items, press the
Menu/Contact List button.
2 Locate the Cellular icon.
3 To turn on Cellular, press the Volume Up button. To
turn off, press the Volume Down button.
If Cellular is on, the following occurs:
• Voice Announcement sounds Cellular On.
• The display shows a check mark beside the Cellular
icon.
If Cellular is off, the following occurs:
• Voice Announcement sounds Cellular Off.
26
• The display shows an "X" mark beside the Cellular icon.

Bluetooth

This feature allows you to use your radio with a Bluetooth-
enabled device (accessory) through a Bluetooth
connection. Your radio supports both Motorola Solutions
and Commercially available Off-The-Shelf (COTS)
Bluetooth-enabled devices.
Bluetooth operates within a range of 10 m (32 ft) line of
sight. This is an unobstructed path between your radio and
your Bluetooth-enabled device. For high degree of
reliability, Motorola Solutions recommends to not separate
the radio and the accessory.
At the fringe areas of reception, both voice and tone quality
start to sound "garbled" or "broken". To correct this
problem, position your radio and Bluetooth-enabled device
closer to each other (within the 10 m defined range) to re-
establish clear audio reception. The Bluetooth function of
your radio has maximum power of 2.5 mW (4 dBm) at the
10 m range.
Your radio can support up to three simultaneous Bluetooth
connections with Bluetooth-enabled devices of unique
types. For example, a headset, a scanner, and a PTT-Only