11.7
Activating the PABX access code (outside line)
In the case of some private branch exchanges, a certain number must be dialled first (e.g. 0"
or 9") before a dialling tone for an outside line is received. The digit entered here is
automatically dialled before the actual phone number selected from the phone book or calls
list.
1. Press the < button.
2. Use the - or + button to select the Handset" option.
3. Press the < button. Several options appear in the display.
4. Use the - or + button to select the PABX Access Code" option.
5. Press the < button.
6. Use the - or + button to select the Set Code" option.
7. Press the < button. The message Set Code" appears in the display.
8. Enter the digit to be assigned (max. 4 different digits possible).
9. Press the < button. The assignment is confirmed in the display.
10. Then select the On" option.
11. Press the < button. The assignment is confirmed in the display.
12. If you want to deactivate the automatic access code, select the Off" option and
press the < button.
13. Press the > button to move back one menu level at a time.
80
− Handset −