Displaying Mailbox/User Data; Sending An Sms Message To A Personal Mailbox - AUDIOLINE STUDIO 60 Bedienungsanleitung

9.9.2

Displaying mailbox/user data

NOTE: In order to configure the mailbox operation with the telephone network provider, you
need the mailbox ID (extension number). The general mailbox has the mailbox ID
0". When other users are registered, the lowest mailbox ID available is
automatically assigned (1−4).
1. Press the < button.
2. Use the - or + button to select the SMS" option in the display.
3. Press the < button.
4. Use the - or + button to select the Settings" option in the display.
5. Press the < button.
6. Use the - or + button to select the User" option in the display.
7. Press the < button.
8. Use the - or + button to select the required user in the display.
9. Press the < button. Enter the relevant password.
10. Press the < button.
11. Use the - or + button to select the Terminal Number" option in the display.
12. Press the < button. The terminal number is displayed.
NOTE: The terminal number displayed under Step 12 corresponds to the mailbox ID of the
telephone network provider.
13. Press the > button to move back one menu level at a time.
9.9.3

Sending an SMS message to a personal mailbox

NOTE: SMS mailboxes can only be used if the telephone network provider offers the facility.
Please request a configuration instruction manual on setting up mailbox operation
from your telephone network provider.
In order to receive a text message in your personal mailbox, the sender must know your
mailbox ID and append it to your phone number.
You can send an SMS message to the receiving party containing information on your personal
mailbox.
This SMS provides your SMS partner with your SMS call number including the current mailbox
ID and it can be stored in the phone book. If the mailbox ID is invalid, the SMS message will
not be sent.
− SMS Text Messages −
71