Dialling Phone Numbers Stored In The Phone Book; Displaying The Call Timer; Adjusting The Receiver Volume; Redialling - AUDIOLINE STUDIO 60 Bedienungsanleitung

5.7

Dialling phone numbers stored in the phone book

After phone numbers have been stored in the phone book (refer to Entering phone numbers
in the phone book , Chapter 8.1), they can be called quickly and easily.
1. Press the > button. The phone book entries appear in the display in alphabetical
order.
2. Use the - or + button to scroll to the required name in the phone book.
NOTE: To select an entry directly, press the corresponding button to enter the first letter of
the name required. To select the name Peters" directly, for example, press the 7
button once.
3. Press the ( button and the selected phone number is dialled automatically.
5.8

Displaying the call timer

When a call is being made, the call time is indicated in minutes and seconds and the number
of the person called appear in the display after about 15 seconds.
5.9

Adjusting the receiver volume

The volume of the receiver can be adjusted according to requirements.
Press the + or - button during a call to set the volume to one of five levels.
5.10

Redialling

Refer to Dialled numbers (redialling)", Chapter 10.4.
5.11

Muting the handset

By pressing the > button during a telephone call, the microphone in the handset is
deactivated. Secrecy" appears in the display. You can then talk to someone else without the
caller being able to hear you. The loudspeaker in the handset remains switched on, so that
you can continue to hear the caller.
Press the > button again to deactivate the muting function.
5.12

Switching the handset on /off

Press the ) button for 2 seconds to switch the handset on and off. The display lights up or
goes out accordingly.
5.13

Locating the handset (paging)

If you have mislaid your handset, you can locate it with the aid of the base station.
1. Press the Paging button P on the base station. All the handsets registered on the
base station ring.
2. To stop the paging function, press the Paging button on the base station again or
any button on the handset.
58
− Operation −