Fuel Tank Cap; Usb Charge Unit With Blue Led (Option Parts) - Sym MIO Anleitung

SEAT LOCK
 Unlock：
1. Insert the ignition switch key into lock located under seat left (front) and turn to right to unlock.
2. Press the seat open switch (SEAT OPEN)。

Lock：
Press the seat down and it will be locked automatically.
After the seat has been locked, check to make sure it has been locked properly by lightly lifting the seat.
CAUTION：

Be sure to remove the key after the seat has been locked.

Do not put the key inside the storage box after unlocking to avoid the key being locked inside the
storage box when the seat is pressed down automatically.

FUEL TANK CAP

1. Insert ignition switch key into the ignition switch, and turn
the key to the right, then the cap can be opened
automatically.
2. Do not fill above the fuel upper limit when refueling.
3. Simply push the fuel tank cap. Fuel tank cap can be
locked.
USB CHARGE UNIT with BLUE LED
Turn ignition on and the USB LED normal on as well.
DC5V±0.5V
1. Output voltage:
blue LED light.
2. Output current: 2.0±10%A MAX。
3. Overloading short circuit protection:> 3.0±10A%,
Fuel tank cap
(Option parts )
with luminous
11
7.Use of Each Component
Inner box with key
USB charge unit (Inside inner box if installed)
Water proof rubber cover