Operation Of Ignition Switch - Sym MIO Anleitung

7.Use of Each Component
30 seconds.

OPERATION OF IGNITION SWITCH

Shut button
ANTI-THIEF MAGNETIC KEY：
 Insert your magnetic key into the magnetic keyhole, and turn it to right ignition keyhole block
board can be to open.
 When close ignition keyhole. You just push the shut button, and ignition keyhole can be to close.
IGNITION SWITCH：
"ON" position (engine start)：

Engine can be started in this
position.

Ignition switch key cannot be
removed.
"OFF" position (engine shut off)：

Engine is shut off and cannot be
started in this position.

Ignition switch key can be removed.
SEAT"OPEN" position：
 Turn ignition switch to "
position and the seat can be open.

There are three positions you can
use.
IGNITION SWITCH
SEAT
Ignition keyhole Ignition switch
keyhole
Magnetic keyhole
"OPEN" position (fuel tank cap open)：


"LOCK" position (steering handle lock)：

"



8
Magnetic key
IGNITION SWITCH KEY
How to open：Insert and push your
key into the ignition
switch, then turn it to
the right.
How to lock：Push the fuel tank cap and
it locks automatically.
Turn the steering handle to left and
press ignition switch key down and
then lightly turn it to left to the "OFF"
position.
The steering handle is locked in this
position.
Ignition switch key can be removed.
When unlocking, simply turn the key
from "OFF" to "ON