Cebora WIN TIG DC 220 M Bedienungsanleitung Seite 30

10.5 WELDING WITH A JOB
Access the JOB menu as described in 10.1
To return to the main screen, press knob B (do not re-
lease immediately) (> 0.7 sec.)
10.6 LOGGING OFF FROM A JOB
To return to the main screen, press knob B (do not re-
lease immediately) (> 0.7 sec.)
30
11 (SECTOR S)
This sector is positioned on the upper part of the display.
It provides in summary form the welding and cooling unit
Select and
settings, block and other functions.
c o n f i r m
the desired
12 TEST GAS (SECTOR T )
number.
every second; when the time ends, the electronically
controlled valve closes automatically; on pressing the
knob of the encoder during this time, the electronically
controlled valve closes.
Select and
13 WELDING WITH COVERED ELECTRODES (MMA)
confirm the
JOB sector.
ing the polarity required by the manufacturer of the elec-
trodes you will be using; also connect the clamp of the
ground cable to the workpiece, as close to the weld as
The program
possible, making sure that there is good electrical con-
is available
tact.
for welding,
• Do not touch the welding torch or electrode clamp and
and no pa-
the ground clamp.
rameter can
• Turn on the machine using the G switch.
be modified.
• Select MMA Process
• Adjust the current based on the electrode diameter,
welding position and type of joint to be made.
• Always remember to shut off the machine and remove
the electrode from the clamp after welding.
To select this process, see chapter 5.
Select and
confirm the
JOB1 sec-
tor.
To modify the welding parameters, proceed as follows:
Select and
confirm the
EXIT sector.
The function enables adjustment of the gas
flow . With the function activated, the elec-
tronically controlled valve opens. For 30 sec-
onds, the symbol glows, changing colour
This welding machine is suitable for welding
all types of electrodes, with the exception of
cellulosic (AWS 6010).
• Make sure that the G switch is in position
0, then connect the welding cables, observ-
Adjust the
welding cur-
rent using
the knob B..
Select and
confirm the
sector rela-
tive to weld-
ing parame-
ters.