Assembly And Preparation; Preparations For Assembly - In Shape 17415 Gebrauchsanweisung

When the rowing machine is in use, it
should be monitored continuously. When
the rowing machine is in use, any children
near it must not be left unattended. The
rowing machine is not a toy.
Remember to check your rowing machine
regularly. Tighten all screws, bolts and nuts
on the rowing machine as required. Inspect
the rowing machine and replace any worn
parts. Do not use the rowing machine if it is
defective.
When moving the rowing machine, employ
the correct lifting technique.
The rowing machine is only intended for
indoor use in private households.

Preparations for assembly

Two people are required to assemble the
rowing machine.
Lay all the pieces out on the fl oor and check
that all the parts are there.
Please refer to the illustration and parts list
at the back of the manual.
You must use the following tools:
• Allen key
• Adjustable wrench or spanner
• Phillips screwdriver

Assembly and preparation

Screw the handles (22) for adjusting the
tension securely to the axle (24) in the
frame.
Screw the front stabiliser (2) securely to the
frame (1) using the bolts (4), curved washers
(5), spring washers (6) and nuts (7).
DK
NO
SE
FI
GB
DE
ET
27