Jacobsen AR3 Serie Sicherheits-, Bedienungs- Und Wartungshandbuch Seite 60

11 TROUBLESHOOTING
11.2.5Streaks
NOTE: Arrow indicates direction of travel.
Probable Cause
Damaged blade(s).
Turning too aggressively. Cutting units don't
overlap during turns or on side hills.
Tire mats down grass before it is cut.
Wet grass is matted down before it is cut.
en-60
SAFETY, OPERATORS & MAINTENANCE MANUAL
A streak is a line of uncut grass. This is usually caused
by a damaged blade.
Remedy
Replace blade(s).
Turn less aggressively to allow cutting units to overlap.
Change mowing direction or pattern on side hills.
Check/adjust tire inflation pressure. (Refer to Parts &
Maintenance Manual.)
Cut when grass is dry.
JACOBSEN AR3