Inhaltsverzeichnis
Werbung
Installing the CPX2000 Series System and Field Replaceable Units
Loading and Unloading Removable Drive
Media
3
Caring for Removable Media
3-50
To load a floppy disk:
1. Turn ON system power.
2. Slide the floppy disk into the drive, label up and arrow forward.
To eject a floppy disk:
1. Press the button on the drive to release the floppy.
2. Pull the floppy disk out of the drive.
To prevent loss of data or damage to disks, store them in a protected
location that meets the following requirements:
No direct sunlight
No sources of magnetization
No dust
A temperature range of 10º to 52º C (50º to 125º F) or as stated on
the media cover. Try to keep the disks in the middle of this
temperature range for best storage results.
A relative humidity range of 8% to 80%. The best storage humidity
environment is at the middle of this range.
To prevent damage to data on the disks, avoid touching the exposed
surfaces or breaking open the protective coverings on the media.
Literature Center Web Site
Werbung
Inhaltsverzeichnis
