Inhaltsverzeichnis
Werbung
Installing the CPX2000 Series System and Field Replaceable Units
3
3-42
15. Unplug the five connectors from the backplane (CPX2208 only).
CPX2208 bottom view
16. Facing the front of the chassis, remove the two screws securing the
power supply to the right side of the chassis. Use a number 1,
Phillips head screwdriver (right angle). Refer to the figure on page
3-40. (CPX2108 only).
17. Facing the rear of the chassis, remove the six screws securing the
rear panel covering the backplane (CPX2108 only).
18. Disconnect the power supply wire bundles from their backplane
connectors (CPX2108 only).
Bottom Plate
Mounting Holes
Power Supply Cables
and Connectors
Literature Center Web Site
Backplane
2301 9807
Werbung
Inhaltsverzeichnis
