Turning On The Ac System - Motorola CompactPCI CPX2000-Serie Installationsanleitung

7. Plug the other end of the video cable into the video connector on the
8. Connect the keyboard and mouse "Y" cable into their ports on the
9. Plug all power cords into a grounded, surge-protected power source.

Turning on the AC System

Use this procedure to turn on an AC system.
Cover all open module slots and put all panels in place before
!
turning on power. Slot covers, panels and the front security
Warning door must remain in place during system operation. This is
necessary to avoid electrical shock, other possible hazards;
and to properly cool the chassis.
To power-up the system:
1. Move the rocker switch on the front of the DC power supply to ON
2. Move the rocker switch(es) on the front of the AC power supply(ies)
3. Move the rocker switch on the front of the chassis (behind the
http://www.motorola.com/computer/literature
Installing the CPX2000 Series Chassis in a 19" Rack
CompactPCI CPU or video card.
CompactPCI CPU.
(I) (CPX2208DC only).
to ON (I) (CPX2408 only).
security door) to ON (I). The system begins its normal start-up
routine and is ready to use.
3
3-9