Inhaltsverzeichnis
Werbung
Removing a CPU module
Use this procedure to remove a CPU module from the chassis.
Set the main power switch on the front of the chassis to OFF
!
(O). Set the power supply switch(es) to OFF (O)
(CPX2208DC and CPX2408 only).
Caution
1. Set the power switch(es) to OFF (O).
Your system may have multiple power supply cords.
!
Disconnect all power supply cords before servicing.
Warning
2. Remove power from the system by disconnecting the power cord(s)
Handling modules and peripherals can result in static damage.
!
Use a grounded wrist strap, static-dissipating work surfaces
and anti-static bags for component storage.
Caution
3. Disconnect any cables attached to the front of the module.
4. Completely loosen the module's captive screws. Refer to the figure
5. Press the ejector levers outward at the same time to eject the
http://www.motorola.com/computer/literature
from the source.
on page 3-16.
module.
Removing and Installing a CPU Module
3
3-15
Werbung
Inhaltsverzeichnis
