Weighing With Tolerance Range; Traffic Light Function - KERN GAB 6K1DNM Betriebsanleitung

Printout example:
Parts counting:
G. 0.500 kg Reference weight
50 g/pcs Average parts weight
10 pcs Number of parts

10.5 Weighing with tolerance range

You can set an upper or lower limit when weighing with tolerance range and thus
ensure that the weighed load remains exactly within the set limits.
Exceeding or dropping below the tolerance range is indicated by an audio sound or
optical signal.
Audio signal:
The audio sound depends on the setting in menu block "BEEP" (See chap. 11
menu).
Options:
• 0
No audio sound during tolerance weighing
• 1
An acoustic signal sounds when load is within tolerance limits
• 2
An acoustic signal sounds when load is beyond tolerance limits
Optical signal:
The arrow symbols indicate whether load is within the two set limits.
The icons provide the following information:

10.5.1 Traffic light function

When using a traffic light, the following can be displayed:
red lamp
yellow lamp
green lamp
26
1.
Goods to be weighed above tolerance limit
2.
Goods to be weighed within tolerance range
3.
Goods to be weighed below tolerance limit
Goods to be weighed above tolerance limit
Goods to be weighed below tolerance limit
Goods to be weighed within tolerance range
GAB-N-BA-e-1817