Specifications And Standards; Environmental Conditions - KaVo DEXIS Titanium Benutzerhandbuch

Appendix B
Spe c i f i ca t i o ns a nd Sta nd a rd s
DEXIS Titanium Sensor Specifications
SENSOR ARCHITECTURE
X-RAY PARAMETERS
SW ARCHITECTURE
ELECTRICAL RATING
CONNECTION TO PC
PROTECTION AGAINST SHOCK
MODE OF OPERATION
METHOD OF STERILIZATION

ENVIRONMENTAL CONDITIONS

USAGE
DEXIS Titanium sensor is not suitable to be oper-
ated in oxygen rich and/or explosive environ-
ments
TRANSPORTATION AND STORAGE
Transport in the supplied protective package
EU CLASSIFICATION
Protection against water/matter – IP 68
English
Indirect converting dental IO X -ray sensor
1692 by 1324 pixels
19.5 μm pixel pitch
20+ visible lp/mm
Sensor can be used with dental X-ray generators in the range
of 60 to 70 kV; at minimal 40 μGy incident dose
USB 2.0 compliant USB interface + application interface to
dental imaging software products
Operation system:
Microsoft Windows 7 with current service pack
Microsoft Windows 8.1with current service pack
Microsoft Windows 10 with current service pack
DC 5V, 0.5W
USB 2.0 compliant / USB3.x compatible
Type BF
applied part
Continuous
Sensor not suitable for sterilization
Humidity Air Pressure
30% to
95%
700 to 1060
hPa
10% to
95%
Class IIa medical device according to MDD
93/42/ECC
Ambient
Temperature
5° to 30°C
-40° to 70°C
33