WARNING
This machine is only intended for extraction of dry material.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
Work area environment
Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.
CAUTION
Do not rinse the machine with water.
Only use accessories approved by the manufacturer for use in Zone 22. The use of other accessories may cause an explosion.
Only suction accessories in antistatic material or metal may be used.
Overload
Never let the machine work fully throttled, as this poses a risk of overheating.
Bodily injuries
CAUTION
Never try to change electrical connections yourself. An error can be fatal!
Never allow the extraction point to make contact with any part of the body. The strong negative pressure can damage blood
vessels in the skin.
Power cord
Never pull the machine by the power cord. Keep the power cord away from heat and sharp objects. Regularly inspect the power
cord.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.
Important safety precaution
WARNING
Only use accessories approved by the manufacturer for use in Zone 22. The use of other accessories may
cause an explosion. Only suction accessories in antistatic material or metal may be used.
CAUTION
If defective or non-genuine parts (especially filters and suction hoses) are used, the machine could leak dust
that is hazardous to health which may result in personal injury. Only conductive plastic bags may be used with
this dust extraction machine (see original part No.). The safe removal of separated materials must be done in
accordance with the directives of CENELEC TR 50404.
Care and maintenance
Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.
Inspection
Regularly check the device for damage and wear. Any damage must be rectified by a Dustcontrol authorized service center.
14
1800/2800 H EX, Art.nr. Part 94169-H