Herunterladen Inhalt Inhalt Diese Seite drucken

Setting The Speed; Pulse Function - Silvercrest SKMH 1100 A1 Bedienungsanleitung

Monsieur cuisine
Vorschau ausblenden Andere Handbücher für SKMH 1100 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 104
RP114279 Küchenmaschine mit Heizung LB5 Seite 86 Montag, 12. Januar 2015 11:02 11
6.5 Steaming
For
steaming,
turn
control 13 to the right until the display 8
shows "SF" ("extra steam").
You will find the exact procedure for
steaming in "8. Steaming" on page 92.

6.6 Setting the speed

You set the speed by rotating the "SPEED"
controller 12:
— The speed can be adjusted in 10 steps:
– Speeds 1 – 4: for the mixer
attachment 22;
– Speeds 1 – 10: for the blade
assembly 20.
Caution!
• The mixer attachment 22 may be
used only at speeds 1 to 4.
• When blending liquids on level 10, do
not exceed a quantity of 1 litre in the
blender jug 6, otherwise liquid may
spray out (see "7. Using the blender
jug" on page 87). At speeds lower
than 10, the blender jug may contain
up to 2 l.
— The currently set speed is shown on the
display 8;
— The speed can be modified while the
appliance is in operation;
— If you change the speed setting to "0"
while the appliance is in operation, it will
stop;
— If you have selected a temperature, only
speed levels 1–3 are available.
86
Notes:
— If you select a speed from 7 to 10, the
the
temperature
— If the blender jug 6 is extremely full, the
6.7 Starting and stopping the appliance
Once you have set the values for time,
temperature and speed, start the appliance
by pressing the "ON/OFF" button 11.
Press the "ON/OFF" button 11 again to
halt the current cooking or processing
function.

6.8 Pulse function

Caution!
• When blending liquids, do not exceed a
• When you use this function, firmly hold
• Press and hold the pulse button 9 for a
• Never use this function while the mixer
You can briefly select maximum speed (level
10) using the pulse function. This is used for
appliance will begin with speed level 6
and gradually increase to the selected
level. This is to prevent liquid being
thrown out of the blender jug 6 due to
sudden acceleration.
speed may be reduced automatically.
This is done by interrupting the rotation
of the blade assembly 20 at two-second
intervals to prevent the motor from
overheating.
Warning!
When using the pulse function, do
not have any hot ingredients in the
blender jug 6. These could spray
out and lead to scalds.
quantity of 1 litre in the blender jug 6,
otherwise liquid may spray out.
the lid of the blender jug's filling
opening,
including
the
scale 26.
maximum of 10 seconds.
attachment 22 is in use.
measuring

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis