Transport, Packaging And Storage; Commissioning, Operation - WIKA 212.20.100 Betriebsanleitung

4. Transport, packaging ... / 5. Commissioning, operation

4. Transport, packaging and storage

4.1 Transport
Check the instrument for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
EN
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property
can occur.
▶
▶
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during trans-
port (e.g. change in installation site, sending for repair).
Permissible conditions at the place of storage:
Storage temperature: -40 ... +70 °C
Avoid the following influence:
Mechanical vibration, mechanical shock (putting it down hard)

5. Commissioning, operation

Before installation, commissioning and operation, ensure that the appro-
priate instrument has been selected in terms of scale range, design and
specific measuring conditions.
12
When unloading packed goods upon delivery as well as
during internal transport, proceed carefully and observe
the symbols on the packaging.
With internal transport, observe the instructions in chapter
5.2 "Packaging and storage".
WIKA operating instructions pressure gauge, model 2, copper alloy