Troubleshooting - Powerfix Profi HG02404 Bedienungs- Und Sicherheitshinweise

Note: Exercise care with the studs.
These are sharp and can cause in-
jury. Do not use the stud button on
stone or metal wall, but only on walls
with a soft surface.
Vertical laser line
1. Attach a thread to the eye at the
measuring point
2. Hang the product to the point on the
wall where you would like to project
the vertical line. The product hangs
vertically downwards like a plumb
bob. The laser projects a vertical line
on the wall.

Troubleshooting

This product has delicate electronic
components. This means that if it is
placed near an object that transmits
radio signals, it could cause interfer-
ence. If false readings occur, remove
such equipment from the vicinity of
the product.
Electromagnetic interference / high-
frequency emissions can lead to the
product failing. In cases of the product
failing to work, remove the batteries
for a short while and then replace them.
Do this as described in the section
"Inserting / changing the batteries".
.
1
GB/IE/NI 27