Using The Device In A Fixed Mounting; Tips And Tricks; Maintenance And Cleaning; Service Centre - Parkside PBS 600 A1 Bedienungs- Und Sicherheitshinweise

operation / Maintenance and cleaning / Service centre / Warranty
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 120
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 240
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 150
Preselected rotation
speed
Using the device in
Q
a fixed mounting
j
Turn the electrical power tool upside down as
shown in Figures D, F and place it on a stable
working surface.
j
Insert the two clamps
provided for this purpose and clamp the electri-
cal power tool securely down on to the surface.

Tips and tricks

Q
j
never use the same sanding belt to sand wood
and metal.
j
Worn or ripped sanding belts can damage
the workpiece. Change sanding belts at the
appropriate time.
j
Keep the sanding belt properly tensioned so
that it does not hang down too much and
become unusable due to nicks, creases etc.
42 GB/MT
Rust removal
40
medium / high (3-4)
Plastic
120
low / medium (2-3)
Non-ferrous metals
(e.g. aluminium)
80
medium / high (3-4)
into the recesses
11 2

Maintenance and cleaning

Q
Before you carry out any work
on the belt sander always pull the mains plug out
of the mains socket.
The belt sander is designed to be maintenance-free.
j
Clean the device frequently. This should be done
immediately after you have finished using it.
j
Use a dry cloth to clean the device - never use
petrol, solvents or cleaners that attack plastic.
Emptying / cleaning the dust box:
j
Simultaneously press the two release button(s)
and pull the dust box
the device.
j
Empty the dust collection box completely by
knocking the dust out and place the dust box
back on to the device.
j
Always keep the ventilation slots clear.
j
Remove any adhering dust with a narrow
paint brush.

Service centre

Q
J
paired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
J
needs to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
Warranty
Q
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. only in this
backwards from of
5
Have your device re-
If the plug or mains lead
6