Using The Device In A Fixed Mounting; Tips And Tricks; Maintenance And Cleaning - Parkside PBS 600 B1 Bedienungs- Und Sicherheitshinweise

Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 180
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 150
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) ––
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 320
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 120
Preselected rotation
speed
Hardwood
60
high (5–6)
Chipboard
60
high (5–6)
Removing paint /
varnish
60
high (5–6)
Sanding varnish
150
low (1–2)
Rust removal
40
medium / high (3–4)
Operation / Maintenance and cleaning
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 240
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 150
Preselected rotation
speed
Using the device in
Q
a fixed mounting
T urn the electrical power tool upside down as
shown in Figures D, F and place it on a stable
working surface.
I nsert the two clamps
provided for this purpose and clamp the electri-
cal power tool securely down on to the surface.

Tips and tricks

Q
N ever use the same sanding belt to sand wood
and metal.
W orn or ripped sanding belts can damage
the workpiece. Change sanding belts at the
appropriate time.
K eep the sanding belt properly tensioned so
that it does not hang down too much and
become unusable due to nicks, creases etc.

Maintenance and cleaning

Q
Before you carry out any work
on the belt sander always pull the mains plug out
of the mains socket.
The belt sander is designed to be maintenance-free.
Plastic
120
low / medium (2–3)
Non-ferrous metals
(e.g. aluminium)
80
medium / high (3–4)
into the recesses
10 2
GB/IE 11