Using The Device In A Fixed Mounting; Tips And Tricks; Maintenance And Cleaning; Service Centre - Parkside PBS 600 A1 Originalbetriebsanleitung

Operation / Maintenance and cleaning / Service centre
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 320
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 120
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 240
Preselected rotation
speed
Material / type of
work
Coarse finish
(Grit grade)
Fine finish (Grit grade) 150
Preselected rotation
speed
Using the device in
Q
a fixed mounting
T urn the electrical power tool upside down as
shown in Figures D, F and place it on a stable
working surface.
I nsert the two clamps
provided for this purpose and clamp the electri-
cal power tool securely down on to the surface.
22 GB
Sanding varnish
150
low (1-2)
Rust removal
40
medium / high (3-4)
Plastic
120
low / medium (2-3)
Non-ferrous metals
(e.g. aluminium)
80
medium / high (3-4)
into the recesses
11 2

Tips and tricks

Q
N ever use the same sanding belt to sand wood
and metal.
W orn or ripped sanding belts can damage
the workpiece. Change sanding belts at the
appropriate time.
K eep the sanding belt properly tensioned so
that it does not hang down too much and
become unusable due to nicks, creases etc.

Maintenance and cleaning

Q
Before you carry out any work
on the belt sander always pull the mains plug out
of the mains socket.
The belt sander is designed to be maintenance-free.
C lean the device frequently. This should be done
immediately after you have finished using it.
U se a dry cloth to clean the device - never use
petrol, solvents or cleaners that attack plastic.
Emptying / cleaning the dust box:
S imultaneously press the two release button(s)
and pull the dust box
the device.
E mpty the dust collection box completely by
knocking the dust out and place the dust box
back on to the device.
A lways keep the ventilation slots clear.
R emove any adhering dust with a narrow
paint brush.

Service centre

Q
paired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
needs to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
backwards from of
5
Have your device re-
If the plug or mains lead
6