All Models - Jacuzzi sasha series Bedienung Und Wartung

Unscrew the scale removal nozzle tap, insert the spout and pour the liquid into the
opening using the provided bottle; re-screw the tap.
When the "water pitcher" key stops flashing, the function is in progress.
Models with automatic scale removal system
Unscrew the scale removal nozzle tap (refer to the previous figure) and pour 600 ml of
the provided scale remover liquid directly into the opening; then re-screw the tap.
NOTE: the liquid provided enables the execution of various scale removal cycles; if, when you
press the "water-pitcher" key, it flashes for approximately 5 seconds, this indicates that more
liquid is required and you must pour in some more.
Press the "water pitcher" key and wait for it to switch off, then press it a second time:
this will begin to flash, indicating that preliminary operations are underway.
When the key stops flashing, the function is in progress.

All models

Once the programmed time has expired, the emptying and cleaning of the steam gen-
erator cycle begins; at this stage, the "water pitcher" key begins flashing once again; once
it stops flashing and remains white, the cycle is finished.
- Do not turn off the main switch until the scale removal cycle has finished complete-
ly, otherwise the steam generator will not be drained and washed.
- If there is an interruption of electrical power throughout the scale removal cycle, the cycle
remains in the memory: once the power supply is restored, the cycle can restart for the dura-
tion of the remaining amount of time and will end as programmed.
In the case of models without automatic system, we also recommend cleaning
the strainer, situated under the steam generator (see Chapter "Special main-
tenance").
- We advise always keeping a spare scale removal liquid pack.
54