Jacuzzi sasha series Bedienung Und Wartung Seite 59

preliminary operations
programme
activation
each programme lasts
approximately 1 minute
Regulate the water temperature as described above.
With the "Cold fog" programme, only cold water is emitted.
Bring the diverter's ring nut (G) to the indicated position and open the tap (R).
Turn on the main switch: the system will enter into "stand-by" mode and the ON/OFF
display key will light up white.
Press the ON/OFF key: the keys relative to the programmes and the alarm key will
switch on. The display is now ready to receive instructions.
NOTE:
- This mode lasts approximately one minute, after this time, if no key has been pressed, the
system reverts to "stand-by" mode.
- The activation of any key is indicated by an acoustic signal.
Select one of the three programmes and activate it by pressing one of the indicated
keys (once pressed, the key will turn blue):
- Cold fog
- Light rain
- Tropical rain
Every programme can be interrupted at any time by pressing the key relative to the
programme itself.
It is also possible to switch from one programme to another, by first deactivating the
programme in progress before choosing the desired programme.
Once the programme has been terminated, it can be re-activated by pressing the relative key
once again.
Following each use, remember to close the tap (R) and position the diverter's ring nut so that
it aligns with the "shower heads" symbol.
In the instance where temperatures exceeding 38 °C have been selected, position the mixer
knob (M) before the safety stop.
Each programme has a predefined light colour (the shown symbol lights up); specifically
designed to heighten those feelings of well-being and relaxation that Sasha offers.
Refer to the Chapter "Cromodream® for more detailed information.
59