Jacuzzi sasha series Bedienung Und Wartung Seite 58

using the manual functions
B
A
Brassware
Before using this function, it is advisable to regulate the water temperature to the desired
value.
With the "Cold fog" programme, only cold water is emitted.
Rotate the knob (M) so that the reference notch aligns with the preselected value. The
knob is equipped with a safety stop that limits the temperature to 38 °C; to select higher
temperatures, press the button (P).
The maximum temperature of the mixed water must never exceed 45 °C!
Testing the water temperature:
- take the shower.
- bring the diverter's ring nut (G) to the relevant position and turn the tap (R) so that the
water runs.
When the water has reached the desired temperature, rotate the ring nut (G) to the position:
- A: if you intend to use the emotion awakening shower programmes (can be activated via the display).
C
- B: if you intend to use the shower heads.
- C: if you intend to use the waterfall.
D
- C: if you intend to use the shower.
Waterfall
Located on the lower wall, it emits a rainfall jet. It can be rotated so that you can regulate the
water direction according to preference.
Following each use, remember to close the tap (R) and position the diverter's ring nut so that
it aligns with the "shower heads" symbol.
In the instance where temperatures exceeding 38 °C have been selected, position the mixer
knob (M) before the safety stop.
58