Disposal; Packaging; Troubleshooting - Silvercrest SNM 700 A1 Bedienungsanleitung

9. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates that
the product requires separate
refuse collection in the European Union. This
applies to the product and all accessories
marked with this symbol. Products identified
with this symbol may not be discarded with
normal household waste, but must be taken to
a collection point for recycling electric and
electronic appliances. Recycling helps to re-
duce the consumption of raw materials and
protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
22 GB

10. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
• Check the connection.
• Has the blender jug 5-
No function
• Has the overheating
Blade of the • Switch off immediate-
blade attach-
ment 8/9 not
turning or turn-
ing with diffi-
culty
• Is the quantity of ingre-
Liquids are run-
ning out
Possible causes /
Action
connected to the pow-
er supply?
7 been engaged prop-
erly?
protection switched off
the device? (see
"Overheating protec-
tion" on page 20)
ly, pull out mains
plug 4 and check:
Is there any obstacle in
the blender jug 5-7?
dients filled into the
blender jug too large?