Program Settings - Nibe ECS 40 Installateurhandbuch

Program settings

Program setting of ECS 40/ECS 41 can be performed
via the start guide or directly in the menu system.
START GUIDE
The start guide appears at first start-up after installation
of the heat pump/indoor module, but is also found in
menu 5.7..
MENU SYSTEM
If you do not make all settings via the start guide or need
to change any of the settings, this can be done in the
menu system.
MENU 5.2 - SYSTEM SETTINGS
Activating/deactivating of accessories.
Select: "climate system 2" for climate system 2, "cli-
mate system 3" for climate system 3 and "climate
system 4" for climate system 4, up to eight climate
systems.
1) Applies to NIBE F1145, F1155, F1245, F1255, F370, F470, F730
and F750.
MENU 5.2.4 - ACCESSORIES
Activating/deactivating of accessories.
Select: "climate system 2" for climate system 2, "cli-
mate system 3" for climate system 3 and "climate
system 4" for climate system 4, up to eight climate
systems.
2) Applies to NIBE F1345, F1355, SMO40, VVM 225, VVM 310,
VVM 320, VVM 325 and VVM 500.
MENU 5.1.2 - MAX FLOW LINE
TEMPERATURE
Setting the maximum flow temperature for each climate
system.
MENU 5.3.3 -EXTRA CLIMATE SYSTEM
Mixing valve settings for extra installed climate system.
MENU 1.1 -TEMPERATURE
Setting the indoor temperature.
MENU 1.9.1 -HEATING CURVE
Setting the heat curve.
MENU 1.9.2 -EXTERNAL ADJUSTMENT
Setting external adjustment.
MENU 1.9.3 -MIN. FLOW LINE TEMP.
Setting the minimum flow temperature for each climate
system.
MENU 1.9.4 -ROOM SENSOR SETTINGS
Activating and setting the room temperature sensor.
ECS 40/ECS 41 | GB
MENU 5.6 -FORCED CONTROL
Forced control of the various components in the heat
pump/indoor module as well as in the various accessor-
ies that may be connected. EP21 is climate system 2,
EP22 is climate system 3, EP23 is climate system 4.
EP2#-AA5-K1: No function.
EP2#-AA5-K2: : Signal (close) to shunt (QN25).
EP2#-AA5-K3: : Signal (open) to shunt (QN25).
EP2#-AA5-K4: Activating the circulation pump (GP20).
1)
2)
Caution
Also see the Installer Manual for the relevant
heat pump.
103