Herunterladen Inhalt Inhalt Diese Seite drucken

Anschluss Nach Ul - Lenze i950 Montage- Und Einschaltanleitung

Vorschau ausblenden Andere Handbücher für i950:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Elektrische Installation

Anschluss nach UL

Anschluss nach UL
WARNUNG!
▶ UL/CSA marking
▶ Secondary circuit shall be supplied from an external isolating source.
▶ Maximum surrounding air temperature is 45 °C.
▶ Maximum surrounding air temperature with derating is 55 °C.
▶ Marquage UL/CSA
▶ Le circuit auxiliaire doit être alimenté par une source de tension externe isolée galvaniquement.
▶ Température ambiante maximale : 45 °C.
▶ Température ambiante maximale avec dèclassement : 55 °C.
WARNUNG!
▶ UL marking
▶ The supply shall be derived from a non-corner grounded type TN AC source not exceeding 277 V phase to
earth.
▶ Marquage UL
▶ L'alimentation triphasée doit provenir d'une source de type TN ne dépassant pas 277 V entre phase et
terre.
WARNUNG!
▶ UL marking
▶ Drives shall be used with line reactor connected in series with AC mains, all rated min. 480 V.
▶ Lenze type designation see table below.
▶ Marquage UL
▶ Les variateurs avec une tension assignée mini de 480 V doivent être utilisés avec une inductance de ligne
raccordée en série à un réseau électrique triphasé.
▶ Se reporter au tableau ci-dessous pour connaître les désignations de type Lenze.
38

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis