Barazza 1PIDS80N Bedienungs- Und Montageanleitung Seite 20

4
comes on.
0 4
comes on.
e 4
and a number
come on.
7
comes on.
e 0 3
comes on.
e 2 1
e 0 3
comes on.
e 0 3
comes on.
comes on.
e 0 3 e 0 3 e 0 3
7 7
, ,
, , or
comes on.
If you cannot find a solution to the problem yourself, contact your dealer or an
Authorised Service Centre. Give the data from the rating plate.
Water or cooking utensils
above the control panel.
There is no cookware on the
zone.
The cookware is incorrect.
The dimension of the bottom
of the cookware is too small
for the zone.
The cookware does not
cover the cooking zone.
There is an error in the
appliance.
The induction
overheated.
The appliance is overheated.
The cooling fan might be
blocked.
Incorrect data configuration.
None or faulty communication
between control panel and
induction coils.
Control Panel is wrongly
connected.
7
An internal component of the
appliance needs replacing.
Remove the objects from the
control panel.
Put cookware on the zone.
Use the correct cookware. Refer
to "Induction Cooking" chapter.
Use cookware with correct
dimensions. Refer to "Induction
Cooking" chapter.
Cover the cooking zone fully.
Disconnect the appliance from
the electrical supply for some
time.
from the electrical system of
the house. Connect it again.
If comes on again, contact an
Authorised Service Centre.
coils are Allow the appliance to cool
down.
Allow the appliance to cool
down. Check if objects block
the cooling fan. If comes on
again, contact an Authorised
Service Centre.
New
Contact an Authorised Service
Centre.
Ensure that connection cable
is plugged on correctly and
functional.
Connect
voltage.
Contact an Authorised Service
Centre.
- 20 -
Disconnect the
configuration needed.
to correct
fuse
mains