Barazza 1PIDS80N Bedienungs- Und Montageanleitung Seite 16

heat level for 10 minutes.
At the end of this timeframe, the cooking
zone heat level will automatically go back
to level «9». The use of this function
is recommended for heating large
quantities of liquids (e.g. water to cook
pasta) or food in a very short time.
To activate this program press the
Booster key or slide right on the slidebar
until the «P» symbol appears
cooking zone display.
• PAUSE
When at least one cooking zone is
operating it is possible to momentaneously
pause the appliance switching off the
heating elements by pressing the Pause
key. When the pause function is active
the relative led is on.
The pause function has a maximum
duration of 10 minutes. If the status
is not terminated within this time the
appliance switches off.
The pause function can be deactivated
by pressing the Pause key and within
10 seconds any of the control keys.
Previously programmed timers will be
stopped during the pause.
• RECALL
When the appliance has been switched
off by mistake it is possible to quickly recall
the previously active settings by pressing
the On-Off key within 6 seconds, then
pressing the Pause key within another 6
seconds. If the recall function is available
the relative led of the Pause key will be
enlighted when the appliance is switched
on again.
• TIMER
This function allows you to set the time
from «01» (1 minute) to «99» (99 minutes)
for the automatic switch off of a cooking
zone.
Switch on a cooking zone by sliding on
the slidebar to adjust the heat level. To
activate the timer press simultaneously
the timer [ ] and [ ] keys until the clock
symbol lights up beside the cooking
zone display, then set the desired time
using the timer [ ] and [ ] keys within
5 seconds. Wait for 5 seconds for
the automatic confirmation. The time
countdown will be start on the timer
display.
When time elapses the cooking zone will
automatically switch off, the timer display
on the will show a flashing «00» and an acoustic
signal will be heard. Press the [ ] or [ ]
key to stop the signals.
To disable the timer of a cooking zone
press repeatedly and simoultaneously
the [ ] and [ ] keys until the clock
symbol lights up beside the display of the
desired cooking zone, press again the
timer [ ] and [ ] keys simoultaneously,
then bring the timer value back to «00»
by using the timer [ ]key. Wait for 5
seconds for the automatic confirmation.
The clock symbol beside the cooking
zone display goes off.
• EGG TIMER/REMINDER
When no cooking zone is active it is
possible to set an acoustic reminder
which stays active after switching the
appliance off. When the Egg timer/
Reminder function is active, the Timer
function cannot be selected.
To enable
simoultaneously the timer [ ] and [ ]
keys. The clock symbol lights up below
the timer display. Set the time, ranging
from «01» (1 minute) to «99» (99 minutes),
by pressing the timer [ ] and [ ] keys.
Wait for 5 seconds for the automatic
confirmation. The time countdown will
be shown on the timer display.
When time elapses the display will show
a flashing «00» and an acoustic signal will
be heard. Press the [ ] or [ ] key on to
stop the signals.
To disable the Egg timer/Reminder
function press simoultaneously the timer
[ ] and [ ] keys. The clock symbol
lights up below the timer display. Bring
the timer value back to «00» by using
- 16 -
this function press