Klarstein Beerkules Bedienungsanleitung Seite 44

EN
44
Note: Don't move other screws when processing tube replacement, otherwise it may
cause the beer leakage or gas leakage.
Replace the seal circle of beer tube
Replace the new seal circle of beer tube if the connector has leakage (see figure 27).
1. Replace the new seal circle of beer tube if the connector has leakage
2. Take out the seal circle of beer tube
3. Replace a new seal circle on same position
4. Turn the seal circle tightly to avoid any leakage
Connection 1 Connection 2
Figure 26
Seal circle
Beer tube
Figure 27