Enabling/Disabling Value Storage; Viewing The Measured Values; Erasing All Stored Values; Printing All Stored Values - Tesa Rugosurf 90 G Gebrauchsanleitung

TESA Rugosurf 90 G

17.1 Enabling/disabling value storage

To enable or disable value storage, press

17.2 Viewing the measured values

To toggle to the viewing mode, press
To choose a measured value, use either key
To delete any displayed measurement, just press

17.3 Erasing all stored values

Whenever is pressed down, the following message is displayed:
Press to confirm or to leave off.

17.4 Printing all stored values

To have all values stored in the memory be printed out, press

17.5 Cancelling last value stored

The last value stored in the memory will be cancelled if you press If so, the following message is displayed:
Activate to confirm or to leave cancelling values.
22