④ Gerätesteuerung und Dante-Audio
Steuerung: Ein an das Netzwerk angeschlossener Computer steuert das Mikrofon mit der Shure Designer-Software. Sie
können Erfassung, Stummschaltung, LED-Verhalten, Lobe-Einstellungen, Gain und Netzwerkeinstellungen ferngesteuert
einstellen.
Audio: Die Audioführung erfolgt über Dante Controller oder die Shure DesignerSoftware. Dante Virtual Soundcard er
möglicht Audio-Abhörung und -Aufzeichnung direkt am Computer.
Differences Between 3.x and 4.x Firmware
When you update an MXA910 from 3.x to 4.x firmware, you'll be able to use IntelliMix DSP features optimized for MXA.
Here's what changes with 4.x firmware:
IntelliMix DSP Added
•
You can now use AGC, AEC, noise reduction, compressor, and delay.
◦
These DSP features don't affect individual channel outputs—they only apply to the Automix Out channel
•
If you're currently using the Automix Out channel on a 3.x device and you update it to 4.x, the following settings will be ap
plied automatically:
◦
AGC: enabled
◦
AEC: enabled
◦
Noise reduction: enabled
◦
Compressor: disabled
◦
Delay: disabled
New Automixer Added
•
The 4.x automixer has different mix modes than the 3.x automixer.
•
Here's how mix mode settings will change:
3.x Automixer Setting
Classic
Smooth
Manual
Custom
New Autofocus Feature Added for All Lobes
•
Patent-pending Autofocus technology continually fine-tunes the position of each lobe in real time.
•
Lobes move automatically for consistent sound when participants lean back in their chairs or stand up.
Echo Reduction Removed
•
The microphone now has AEC, so there's no need for echo reduction.
•
The Echo Reduction Reference In channel's name in Dante Controller is now the "AEC Reference In" channel. Any exis
ting Dante route to that channel will persist.
Other Changes
•
Template 1's lobe positions have changed.
◦
If you're using Template 1 with the default lobe positions, updating to 4.x will change your lobe positions.
™
™
New 4.x Automixer Setting
Gating
Gain Sharing
Manual
Gating
Shure Incorporated
7/62