Usb Changing Socket; Menu And Settings Menu Structure - Stromer ST2 S Bedienungsanleitung

The app also shows you the position and the bat-
tery charging state – even when you are not near
the Stromer.

USB CHANGING SOCKET

Only the ST2 and ST2s models have this fea-
ture.
Is the battery of your smartphone empty? – No
problem. The Stromer has been equipped with a
USB charging socket. Connect your smartphone to
recharge the battery.
The charging socket is located in front on the day-
time running light and is sealed by a rubber lip.
Only connect your smartphone when the S-
Pedelec is standing. Do not change your smart-
phone while riding.
50 51
Range
The achievable range per charge is dependent on
various factors:
• Support level: The higher the support level
used, the lower the range.
• Riding style: You can save energy with the
optimal use of the gear shift. In lower gears
you need to use less power, the support will be
less and your S-Pedelec's drive consumes less
energy.
• Ambient temperature: A battery discharges
faster in cold weather.
• Weather and vehicle weight: In addition to
the ambient temperature, wind conditions also
have influence on the range. More force has to
be applied while riding through strong head-
winds. The weight increases with luggage etc.
and more power is also then needed.
• Technical condition of your S-Pedelec: Too
low air pressure in the tires increases the roll-
ing resistance. Dragging brakes also affect
range.
• Battery capacity: The battery capacity indi-
cates the capacity of a fully charged battery,
to store a certain amount of electricity. As the
capacity decreases with the increasing age of a
battery, the amount of storable energy in a full
charge also decreases.
• Road quality and the route profile: Rough pave-
ment or gravel reduce the range. You can ride
much further on flat surroundings than when
riding on slopes.
MENU AND SETTINGS
Menu structure
Pressing the power button takes you to the short-
cut display. Here you have direct access to all
functions and settings:
Pressing the power button again brings you back
to the driving mode display.
Time
You can individually set the time and the display
format.
1. Go to MENU and SETTINGS.
2. The TIME section can be used to select the de-
sired display format and to set the time.
Languages