Access Through The Intercom Server (Network Relay In Subnet) - Hager Rtd111X Anleitung

RTD111X
Network / Logging into the web interface

Access through the intercom server (network relay in subnet)

In an installation with the IP intercom server RTD110X, first you connect to the network relay in the subnet. Then in the intercom
server, to go "Devices/IP Scanner" and scan the subnet. The network relay is found and displayed. After executing "Add to devices",
the configuration interface can be reached through port forwarding.
Logging into the IP network relay
After calling the Web interface, select one of the menu items. Then you will be asked to enter a username and password (factory
settings: admin / 1234). After the input, click "Log in" and you will find yourself in the settings area.
www.hager.com Subject to technical changes 11