Siemens SIMODRIVE Montagehandbuch Seite 22

Mounting the gear wheel
2.2 Mounting
The incremental and reference track must be correctly located (refer to Section 4,
Mounting diagram).
After mounting, the radial and axial eccentricity of the gear wheel must be chek-
ked. The radial eccentricity at the crown line and at the separation track of the gear
wheel may not exceed 20 mm.
J
Gear wheel encoder SIZAG 2-substitution
2-22
Mounting Guide, 05/2008, 6SN1197–0AB00–0YP6