Select The Equaliser; Adjust Volume Level; Adjust The Brightness; Aux Operation - Silvercrest SST 100 A1 Bedienungs- Und Sicherheitshinweise

Select modes
Press the FUNCTION button on the unit or the
FUNC. button on the remote control to switch
between AUX, TUNER,USB and Bluetooth
modes. The selected mode will show on the
display.

Select the equaliser

While playing, press the EQ button repeatedly
on the remote control to select Flat, Music, Movie
preset equalisers.

Adjust volume level

• Press the VOL+/VOL– buttons to adjust the
volume.
• If you wish to turn the sound off, press the
MUTE button on the remote control. Press the
MUTE button again or press the VOL+ /
VOL- buttons to resume normal listening.

Adjust the brightness

Press the DIMMER button repeatedly to select
different levels of display brightness.
Set the sleep timer
This unit can switch to standby automatically after
a set period of time.
Press the SLEEP button on the remote control
repeatedly to select your desired number of
minutes. The number of minutes shown will display
in this sequence:
S120 4 S90 4 S60 4 S30 4 S15 4 S10 4 00
28 GB/IE

AUX operation

You can also listen to an external audio device
through the unit.
1. Ensure that the unit is connected to the TV or
external audio device.
A: Use the 3.5mm to RCA audio cable
(included) to connect the TV's headphone
socket to the AUX R/L socket on the unit.
B: Use a RCA to RCA audio cable (not
included) to connect the TV's audio output
socket to the AUX R/L socket on the unit.
TV
B A
Press the FUNCTION button on the unit or
2.
the FUNC button on the remote control to
select AUX for your connection.
3. Operate your external audio device directly
for playback features.
Press VOL+ / VOL- to adjust the volume to
4.
your desired level.