Functions Of The Buttons On The Bluetooth Speaker; Use Bluetooth Speaker Via Aux Stereo Jack - Silvercrest SBLL 3 A1 Bedienungs- Und Sicherheitshinweise

Functions of the
buttons on the
Bluetooth speaker
Start a playlist on your playback device.
With the change of the volume at the
Bluetooth speaker the volume at the
playback device is changed. The volume
on the Bluetooth speaker can be adjusted
®
Button Function
- Hold approx. 2 seconds: switch device on or off
- Press briefly during playback: pause or continue playing
- Press briefly during playback: increase volume. One beep signal will
sound when the maximum volume level has been reached.
- Hold during playback: skip to next song in the playlist
- Press briefly during playback: reduce volume.
- One beep signal will sound when the minimum volume has been
reached.
- Hold during playback: previous song in the playlist
- Press and hold the button
the Bluetooth connection.
- Press for approx. 1 second once:
- Press for approx. 1 second twice:
- Press for approx. 1 second three times: switch off the light
Use Bluetooth speaker
via AUX stereo jack
Note: Music playback via cable takes
priority over music playback via Blue-
tooth . Music playback from a Bluetooth
®
source is therefore interrupted once the
jack lead is plugged into the jack
13
The LED lights up green.
5a
Switch on the sound source.
If the Bluetooth
®
and hold the
11
®
.
3
speaker is off, press
button until the
9
as described below. Music is played
back through the speakers
Note: The volume synchronize func-
tion depends on the Android version
and on the brand of mobile phone.
The Bluetooth speaker has 5 buttons.
®
These control the following functions:
approx. 2 seconds to enable / disable
100 % lumen
50 % lumen
signal LED lights green and a signal
tone sequence sounds.
Start playback on the sound source
and adjust the volume to the highest
possible volume. Adjust the volume
on the speaker using the
(up) or the
6
Start playing music on the sound
source.
.
4
button
button (down).
10
GB 11