Bluetooth Operation; Pair Bluetooth-Enabled Devices - Silvercrest SST 100 A1 Bedienungs- Und Sicherheitshinweise

Bluetooth operation

You can listen to tracks from a media device if it is
connected to the unit via Bluetooth.

Pair Bluetooth-enabled devices

• The operational range between the unit and
the device is approximately 8 metres (without
any object between the Bluetooth device and
the unit).
• Before connecting a Bluetooth device to the
unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Obstacles between the device and the unit can
reduce operational range.
• If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
To connect your device to the unit via
Bluetooth:
1. Press the FUNCTION button on the main unit
or the FUNC button on the remote control to
select BluT (Bluetooth) mode. "NO BT" will
show on the display if the unit is not paired to
any Bluetooth device.
2. Activate your Bluetooth device and select the
search mode. "SST 100 A1" will appear on
your Bluetooth device.
If you cannot find the unit, press and hold
the /PAIR button on the remote control to
activate Bluetooth pairing, the display will show
"PAIR".
3. Select "SST 100 A1" in the pairing list.
Display panel shows "BluT" while the pairing
succeeds.
4. Play music from the connected Bluetooth
device.
To Disconnect the Bluetooth function:
• Switch to another function on the unit.
• Disable the function from your Bluetooth
device.
• Press and hold the
remote control.
/PAIR button on the
Note:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with the
unit in 2 minutes it will recover the previous
connection
• The unit will also be disconnected when your
device is moved beyond the operational range.
• If you want to reconnect your device to the
unit, place it within the operational range.
• If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the unit.
• If they are connected the display panel shows
"BluT".
• If the connection is lost the display panel shows
"NO BT". Follow the instructions to pair your
device to the unit again.
NFC (Near Field Communication)
operation
Pair your NFC-enabled mobile device directly with
the unit by just a single tap.
1. Activate NFC on your mobile device.
2. Tap the mobile device on the NFC
the unit. The device vibrates or a message pops
up. Your unit will switch to Bluetooth mode
automatically.
3. Operate your mobile device directly for
playback features.
4. To disconnect, tap the mobile device on the
NFC
icon of the unit to disconnect or
disable NFC from your mobile device.
icon of
NFC sensing area
GB/IE 29