Functions - AEG LI 7 Bedienungsanleitung

No. Description
1
Button for selecting the voltage
6 V / 3.5 A or 12 V / 7 A
2 V / A / % button for switching the display (whilst charging, 5 seconds after switching the display will automatically
switch back to displaying the current battery voltage)
V
A
%
3 Comfort plug connection
4 terminal connection cable (+) with clamp (red)
5 terminal connection cable (-) with clamp (black)
6 terminal connection cable (-) with ring lug (black)
7 terminal connection cable (+) with ring lug (red)
8 Power cable with power plug
9
LED Error red
10 LED Full green
11 LED Charge orange
12
LED Power
13 Mounting option
14 Battery connection cable with on-board outlet comfort connection (accessory, sold separately)

Functions

the charger is equipped with a microprocessor
(McU - Micro computer Unit) and features fully
automatic charging-, diagnostic-, emergency- and
maintenance functions. After selecting the connec-
ted battery (6 V or 12 V) the charger will recognise
the battery capacity and the battery condition
and calculate the required charging parameters
(charging voltage, charging current). this allows
for efficient and safe charging. If the wrong battery
voltage is set or the battery is defective, it will not
charge and the "Error" LED (9) will light up (also see
"Troubleshooting").
the "trickle charge" function allows the charger
to be permanently connected. A full charge will be
maintained.
Function
the red LED will light up next to 6 V or 12 V per the selection.
Indicates the battery voltage.
Indicates the charging current.
Indicates the battery charging status in percent.
See "Troubleshooting".
Lights up once the connected battery is fully charged.
Lights up during the charging process.
Lights up whilst the charger is connected to the 230 V mains socket.
English 21